TIC

Installation-ready industrial door air curtains either as heated or recirculated air curtains (without heat exchanger), in suspended or floor mounted versions. Both variants can be installed in series. Depending on the door width, the floor mounted vertical unit can be installed next to the door, either on one side or both sides. The appropriate TIC modules can be installed on top of each other, depending on the door height. For the suspended variant, multiple modules can be installed next to each other, depending on the door width. In the higher specification variant, the air exitsTIC 6000 & TIC 7000 via the Coanvara discharge nozzle – a multi-nozzle system with optimised, drop-shaped profiles. Using the Coanda effect to bring the individual streams together results in a very broad, homogenous airstream. The purposely long profiles, which are parallel and steplessly adjustable in both directions (up to 40°), act as a flow straightener. This ensures the stream mixing factor remains low, as desired. The selected discharge temperature is carried far down to the floor, effectively preventing the room from cooling down. This means the discharged air is heated less than with air curtains using a conventional discharge system. For the basic TIC-S design, the air is discharged via a conical discharge box – located centrally – without a discharge grill. For the TIC 3000, the air is discharged through a fully adjustable system of fins.

Industrial air curtain unit manufactured with a robust, selfsupporting, powder coated sheet steel housing. Available in the colour RAL 7032 (pebble grey) as standard, or powder coated in standard RAL tones depending on the wishes of the client. In contrast, the housings of the TIC 3000, TIC-S 6000 und TIC 7000 are manufactured from galvanised sheet steel. For the floor mounted vertical unit, the floor console and connecting pieces for series installation are included as standard. For the suspended version, fixation/suspension is performed using M10 rivet nuts.

Heat exchangers for different heating media
LPHW: For normal temperature LPHW 70/50 °C or low-temperature LPHW 60/40 °C, other temperatures available on request. Recirculating air operation without heating is possible (without heating media).
TIC 3000 E: 3-stage heat exchanger, spiral-form, corrosion resistant, with thermal overheating protection.

Axial fans with three-phase motor, IP 54 degree of protection, motor protection via thermal contacts, including protection guard. These fans comply with the EU Directive ErP regarding minimum efficiency requirements for fans within the EU.

Easy installation thanks rivet buts (M10) on top of the unit.