1. Made in Germany
2. Sturdy, self-supporting steel/aluminum composite structure
3. Equipment lengths up to 3,000 mm
4. Installation Options: Free-hanging, flush with the ceiling with an intake chamber, suspended ceiling installation with a sliding connection
5. Easy to maintain thanks to the intake grille with micro-mesh
6. Coanvara discharge nozzle for stepless, parallel adjustment of the discharge angle
7. TEKADOOR Electronic Multifunction Control Unit; on-site control is optional

Self-supporting, plastic-coated sheet steel housing with no visible screws, finished in RAL 9010 (pure white)—other colors available. Intake grille with a micro-grille behind it serving as an intake filter for easy maintenance; removable for easy cleaning without tools. Inspection hatch hinged on one side and opened with latches. The Coanvara nozzle is flush with the bottom of the unit. Water and electrical connections are available either on the top of the unit (right or left) or on the side.

DHW: For standard-temperature DHW (70/50°C) and low-temperature DHW (60/40°C); other temperatures available upon request. High-quality heat exchangers made of copper tubing with press-fitted, extra-strong aluminum fins.

TEKADOOR CAT Electronic Multifunctional Control System

• A 20-meter pre-assembled, shielded data cable is included as standard with devices equipped with PWW and electric heating.
• The 5-stage CAT control system includes a manual/automatic mode and a summer/winter switch as standard features.
• A weekly timer with a timer function can be optionally implemented using enable contacts. For winter operation, a solenoid valve rated up to 2.5 A can be optionally connected.
• With the CAT control system, the airflow can be manually adjusted in 5 steps, and the heating output—which, in the case of electric heating, depends on the fan speed—can be manually adjusted in 3 steps.
• An enable contact and potential-free operating and fault signals are available for control via a customer-supplied BMS or DDC.
• Up to 10 devices can be connected in parallel in a master-slave configuration.
• On-site control via a ModBus interface is also possible.

Die Montage erfolgt durch auf der Oberseite des Gerätes eingelassene Nutschienen mit verschiebbaren Nutsteinen (M10), die ein Ausjustieren der Geräteposition während der Montage vereinfachen. In der Standardausführung braucht das Gerät für den Elektroanschluss nicht geöffnet werden. Anschlussklemmen für die Spannungsversorgung sowie die Steckverbindungen für das Schaltgerät und den Parallelbetrieb sind von außen zugänglich. (Plug&Play)

Easy-to-maintain cleaning (micro-grille) without opening the unit—simply vacuum the intake grille. Inspection opening (hinged on one side) on the underside of the unit, closed and secured by a latch—easy to open.

Standardmäßig ausgestattet mit einzeln angetriebenen AC- und EC-Ventilatoren (doppelseitig ansaugend, wartungsfrei, vibrationsfrei gelagert, mit herausgeführten Thermokontakten als Motorschutz). Die Ventilatoren befinden sich (nach Öffnung der Revisionsklappe) auf einer nach unten ausziehbaren Motorplatte.